Additional details
- Handsfree
- Status display with 4 LEDs incl. yellow/green indicator according to EN81-70
- Single key operation
- Programming remote and local
- Emergency call also without external power supply
- Remote loudspeaker/microphone unit (optional)
- Connection to building system (e.g. filtered alarm, "video / light enable")
- Integrated machine room interface (EN70MR)
- Backlit emergency button can be used as an emergency light.
If a connection is to be possible only in real emergency situations, the door signal can be connected to an input. If this signal changes after the emergency call is triggered, the call will not be executed.
=> Alarm filtering.
| Exicall EN70 Installation vertical | Order no: 121.5102 |
| Exicall EN70 Installation horizontal | Order no: 121.5103 |
| Exicall EN70MR incl. machine room communication, vertical installation | Order no: 121.5104 |
| Exicall EN70MR incl. machine room communication, installation horizontal | Order no: 121.5105 |
The EXICALL®EN70 is a further development of our EXITEL® and EXICALL® info/emergency telephones already introduced on the market. Its basic functions are simple, fast, predetermined connection with an alarm center, a service organization, an information center or with a freely selectable telephone subscriber. The device fully complies with the European standard for applications in elevators (EN81-28 and EN81-70).
A voice announcement continuously informs about the status of the dialing process during the automatic connection setup. If the connection to the first number cannot be established because the control station is busy or there is no answer, further stored numbers are dialed automatically (max. 9).
The EXICALL®EN70 can be called at any time to talk to persons in the cabin or to configure it remotely.
The installation of an EXICALL ® EN70 is recommended wherever a predetermined telephone number is to be reached quickly with a single keystroke. The device can basically be configured as an elevator telephone or as a door station.
Typical applications
- Lifts and underground garages
- Warning and alarm systems
- Bank and ticket machines
- Tourist information points
- Emergency call points and protection zones
- Door stations
- Public call stations
- Call stations in military or police facilities (e.g. bunkers or prison cells).
So that the emergency telephone can be used in all parts of Switzerland and also internationally, the user guidance is multilingual DE/FR/GB/IT.
The EXICALL®EN70 is also available as a handicapped-accessible version. Here, the installation position is horizontal.
Leitronic EXICALL for elevators
Sketch of the Leitronic EXICALL for elevators
Leitronic EXICALL as a door intercom
Leitronic EXICALL used as a door intercom
Leitronic EXICALL ATEX solution
Schematic of the Leitronic EXICALL ATEX solution
Power supply
- Voltage range: 10 – 35 V DC / 8 – 25 VAC
- Power consumption: EXICALL EN70MR: max. 4 W | EXICALL EN70: max. 3 W
Security level
- Standards: EN 60950 / EN 41003
Inputs/outputs
- Input (S1-S4): active: 10 V - 40 V AC/DC | inactive: < 3V
- Closer (K1/K3): max. 4 A/50 V AC/DC
- Normally closed contact (K2): max. 100 mA/50 V AC/DC
Environmental conditions
- Temperature: 0° to 40 °C
- Humidity: 20 % - 70 % rel. humidity, not cond.
Case
- Dimensions: 80 x 275 x 41 mm (W x H x D)
- Weight: approx. 500g
Phone connection
- Type: a,b (analog)
- Dialing method: Tone dialing (DTMF)
Leitronic EXICALL for elevators
Sketch of the Leitronic EXICALL for elevators
Leitronic EXICALL as a door intercom
Leitronic EXICALL used as a door intercom
Leitronic EXICALL ATEX solution
Schematic of the Leitronic EXICALL ATEX solution
Exicall EN70 Documents
Devices no longer in production / end of support
Programmer
Clay key dialer (TTW pad)
Power supply: 2 AAA batteries
Order no.: 121.5017
Engine room telephone: Engine room solution
Telephone for wall mounting in conjunction with EXICALL EN70MR in the cabin.
Order no.: 118.0120
Mounting accessories EXICALL
Mounting frame UP Alu 3mm, ground, colorless anodized, 336 x 130mm
Order no.: 121.5010
Mounting frame UP stainless steel 3mm, ground, 336 x 130mm
Order no.: 121.5018
Wooden box for flush mounting: wall insert for 121.5010 / 5018, 330 x 125 x 80mm
Order no.: 121.5011
Mounting box AP cast aluminum, white, 360 x 120 x 82mm
Order no.: 121.5012
Mounting frame UP stainless steel 3mm, dimension like EXITEL, 336 x 160mm
Order no.: 121.5008
Emergency power unit (NSG) UPS-12V-IP-CPU
Supply voltage: 230 VAC/50 Hz
Backup: with 12 V lead-acid battery e.g. 100.0880
Output: permanent 12 V DC 500 mA for an Exicall EN70 / switched 12 V DC 300 mA for emergency light
Dimensions: 180 x 110 x 84 mm (L x W x H)
Order no.: 121.0117A
+ 100.0117CPU+118.0117+100.0880 mounted in IP65 housing
DIN-rail power supply unit 10 VA (1TE)
Power supply for 3 EXICALL® EN70 or one EA-NSG
Supply voltage: 230 VAC/50 Hz
Secondary voltage: 14.3 V DC
Nominal power: 10 VA
Order no.: 118.0117
Emergency power connection board EA-NSG-CPU (3TE)
Supply voltage: 14.3 V DC e.g. from 118.0117
Backup: with 12 V lead-acid battery e.g. 100.0880
Output: continuous 12 V DC 500 mA for an Exicall EN70
switched 12 V DC 300 mA for emergency light
Order no.: 100.0117CPU
Lead battery
12 V / 1.2 Ah
Order no.: 100.0880
Plug power supply 6 VA
Plug-in power supply for 2 EXICALL® EN70
Supply voltage: 100 - 240 VAC/50 - 60 Hz
Secondary voltage: 12 V DC
Nominal power: 6 VA
Order no.: 118.0114
Plug power supply 18 VA
Plug-in power supply for up to 6 EXICALL® EN70 or 1 EXICALL® EN70 and 1 heater
Supply voltage: 230 VAC/50 Hz
Secondary voltage: 12 VAC
Nominal power: 18 VA
Order no.: 121.5015
Heating plate
A heating plate can be mounted for outdoor installation.
Dimensions: 217 x 72 x 20 mm (L x W x H)
Supply voltage: 12 V
Power consumption: 12 VA
Connections: Open ends
Order no.: 121.5033
Sub station EA-LMC-EC
The slave station with integrated emergency call button enables the triggering of an alarm call and as well as hands-free communication, e.g. as an option in large elevators or on the cabin.
Housing material: ABS
Dimensions: 112 x 56 x 21 mm (L x W x H)
Width incl. plug: 74 mm
Weight: 100 g (without cable)
Plug X2: External emergency call button (closer only)
Order no.: 118.0151
Sub station EA-LMK70
As EA-LMC-EC but with amplifier and own power supply and integrated yellow and green symbol light according to EN81-70.
Supply voltage: 8 - 35 V DC
Plug X7: Primary side connections (control potential)
Plug X2: Telephone side connections
Order no.: 118.0160
Adapter board EA-LMK-ETMA-TRI
Enables quick and easy conversion of current Schindler panels with integrated ETMA elevator emergency call system to EXICALL
Order no.: 118.0172
Information sheet ETMASwitching output for EasyAlarm ELEVATOR | EXICALL EN70 | MINI
Retrofitting of a switching output to any paging stations.
Also works in combination with the Leitronic adapter board ETMA and ORONA as well as for the low-cost paging station LMC-70.
Order no.: 100.0257
Lightning protection adapter (3TE)
Protects the telephone input of the EXICALL® from voltages greater than 150 V and filters ADSL signals.
Dimensions: 90 x 52 x 30 mm (L x W x H)
Order no.: 100.0328
Gateway / Mobile interface
The gateway simulates the analog telephone line.
Backup: 12 V battery
Connections: Phone/Power/Ready:Screw terminals
Indications: Field strength with LED
Network: LTE/UMTS/GSM
Protective housing (IP64 / supply voltage 230 V AC / 50 Hz
EA-LTE-IP-GATW, Order no.: 100.080XBL
DIN housing / supply voltage 230 V AC / 50 Hz or 16 - 35 V DC
EA-LTE-DIN-GATW, Order no.: 100.081XBL
Sub station: LMK70-ATEX Zone 0
The LMK70-ATEX slave station enables alarm triggering via an external emergency call button and the following hands-free connection.
Protection class: II 1 G Ex ia IIC T4 Ga
Dimensions: 112 x 56 x 21 mm (L x W x H)
Order no.: 121.0370
Sub station: LMK70-ATEX Zone 0/20
LMK70-ATEX Zone 0 installed in a protective housing for Zone 20 with integrated emergency call button
Protection class:
II 1 GD Ex ia IIC T4 Ga
Ex ia IIIC T50 °C Da IP64
Dimensions:
160 x 160 x 91 mm (L x B x H)
188 x 160 x 109 mm (L x B x H) PG11 + Button
Order no.: 121.0380
ATEX Barrier outside ATEX zone
Power supply: 8 - 35V CC
Protection class:
II (1) GD[Ex ia Ga] IIC
[Ex ia Da] IIIC
Dimensions: 45 x 118 x 138 mm (L x W x H)
Order no.: 121.0390
Firefighting solution EN81-72: Engine room (intercom) EA-LMK72E-WG
Dimensions: 112 x 56 x 21 mm (L x W x H)
Unassembled
Order no.: 118.0202E
Dimensions. 110 x 180 x 64 mm (L x W x H)
Preassembled in protective housing IP54 incl. push-to-talk button
Order no.: 118.0212E
Fire department solution EN81-72 : Firefighting stop/ multi-floor (free-speech) EA-LMK72ET-WG
Unassembled
Dimensions: 112 x 56 x 21 mm (L x W x H)
Order no.: 118.0204ET
Pre-assembled in protective housing IP54 incl. push-to-talk button
Dimensions: 110 x 180 x 64 mm (L x B x H)
Order no.: 118.0214ET
EasyAlarm ELEVATOR
Herstellerunabhängiger Aufzugsnotruf mit vielfältigen Erweiterungsmöglichkeiten
Studer K+I has discontinued support for the EXICALL NIT960 and Exitel devices as of January 1, 2007. Leitronic AG can offer you an identical, pre-programmed EXICALL EN70 as a replacement, as well as a suitable mounting plate for Exitel, which covers the existing recess. We can also provide you with the old documents for download. However, we cannot provide any further support beyond this.
EXICALL EN®
Exicall® NIT960
Exitel®
Instruction manual (DE only)
Assembly instructions
The mounting frame makes it possible to install a current EXICALL® in the place where an EXITEL was previously installed.
EXICALL EN®
Exicall® NIT960
Exitel®
The mounting frame makes it possible to install a current EXICALL® in the place where an EXITEL was previously installed.