No Internet data connection required.
Additional details
- Remote maintenance via dial-in with PIN query
- User guidance with voice prompts
- Individual announcement texts
| EasyAlarm COMBI - Alarm unit EasyAlarm® EA-8-EXT - Integrated voice output (DE, FR, GB, IT) - Power adapter BBT-DC12S-RJ45 (3m cable) - PIR set-RJ45 (motion detector) - Telephone cable 8 m (both ends RJ11) - Telephone adapter (T+T89) - Instruction manual - Battery(ies) included in delivery |
To the store
|
EasyAlarm® COMBI monitors for sounds and movement.
The events are reported directly to your cell phone, telephone or pager. Up to nine phone numbers are programmable, which are dialed in sequence until the alarm is acknowledged.
No Internet data connection is required, as the EasyAlarm COMBI uses the telephone line.
EasyAlarm® COMBI informs.
The selected participant hears the individual announcement text (location) as well as the cause of the alarm in plain text (noise, sensor 1/2/3, power failure, etc.). Thanks to the integrated microphone, you can optimally assess the situation and, if necessary, talk to your child or a person present.
EasyAlarm® COMBI is remotely maintainable.
After successful remote dial-in by means of PIN code, the monitoring functions can be activated or deactivated in the telephone connection and the phone numbers can be reprogrammed.
EasyAlarm® COMBI is simple.
The user guidance is done with voice prompts.
General
- Dialing method: DTMF (touch-tone dialing)
- Approval: R&TTE Directive 1999/5/EC
Phone numbers
- 9
Connection type
- auf Telefon oder Mobil: Als Hör- oder Freisprechverbindung
- auf Pager (Funkempfänger): Numeric
- to alarm control center with automatic
- transmission (Point ID, P-100)
Alarm causes
- Wired sensors (sensor 1/2/3)
- Sound monitoring (baby monitor)
- Mains failure monitoring
- Direct call (button press)
Additional functions
- Integrated radio receiver (EA-8-868 / EA-80-868)
- Telecontrol wired
- Remote programming (call numbers / sequence)
- Remote dial-in (with PIN code)
- Alarm prioritization (disconnects downstream telephones)
- Switch-on to alarm control panel (Point ID, P-100).
Operating voltage
- 9-16 VDC (via power adapter to EXT/~ socket)
- Emergency operation: 9 V battery
(Alkaline: typical operating time approx. 70 hours).
Power consumption
- Monitoring: 7 mA (typical) during voice playback: 55 mA (max.)
Housing / Weight
- ABS white/200 x 110 x 31 mm (L x W x H)
- 320 g without battery/power adapter
EXT3 set-RJ45, consisting of
- Sensor connection cable for three floating contacts (sensor 1/2/3)
- Cable length 3 m
DIN interface EA-ACDC-SWI-RJ45
- Cable length 3 m
- Alarm input (screw terminals): 10-230 VAC/DC (Sensor 1)
- Switch output (screw terminals): potential-free relay contact 230 VAC/2.5 A
z. B. to control a heater, a siren, a floodlight, etc. - Potential-free alarm contact (sensor 2).
PIR set-RJ45 (wired)
- PIR motion detector BBT-PIR-RJ45 (cable 8m) incl. wall/ceiling bracket
- Presence control on motion.
Mobile connection
The universal gateway generates a cellular-based analog telephone line
Backup: 12 V battery
Connections: Phone/Power/Ready:Screw terminals
Indications: Field strength with LED
Network: LTE/UMTS/GSM
Protective housing (IP64 / supply voltage 230 V AC / 50 Hz
Order no.: 100.080XBL EA-LTE-IP-DUAL
DIN housing / supply voltage 230 V AC / 50 Hz or 16 - 35 V DC
Order no.: 100.081XBL EA-LTE-DIN-DUAL
Siren connector EA-SIR-RJ45, wired
- with power adapter and integrated siren
- cable length 3 m
IP65 protective housing
Protective housing for EasyAlarm
240 x 191 x 107 mm
incl. DIN rail and bushings
EasyAlarm not included
Order no.: 100.0700