No Internet data connection is required, as the EasyAlarm BASIC uses the telephone line.
Additional details
- Remotely maintainable and programmable via PIN dial-in
- User guidance with voice prompts
| EasyAlarm BASIC - Alarm unit EasyAlarm® EA-8-EXT - Integrated voice output (DE, FR, GB, IT) - Power adapter BBT-DC12S-RJ45 (3m cable) - EXT3-Set-RJ45 - Telephone cable 8 m (both ends RJ11) - Telephone adapter (T+T89) - Instruction manual - Battery(ies) included in delivery |
To the store
|
EasyAlarm® BASIC/CONTROL informs.
The selected subscriber hears the individual announcement text (location) as well as the alarm cause in plain text (sensor 1/2/3, power failure, etc.). Thanks to the integrated microphone, the situation (eg machine noise) can be optimally assessed.
EasyAlarm® BASIC/CONTROL is remotely maintainable.
After successful remote dial-in by means of PIN code, the monitoring functions can be activated or deactivated and the phone numbers reprogrammed.
EasyAlarm® BASIC/CONTROL can work remotely.
During the telephone connection, a potential-free switching output can be activated or deactivated (=> accessories for BASIC, included with CONTROL), e.g. to switch a heater remotely.
EasyAlarm® BASIC/CONTROL is simple.
The user guidance is done with voice prompts.
No Internet data connection is required, as the EasyAlarm BASIC uses the telephone line.
General
- Dialing method: DTMF (touch-tone dialing)
- Approval: R&TTE Directive 1999/5/EC
Phone numbers
- 9
Connection type
- To telephone or mobile: as a listening or hands-free connection
- to pager (radio receiver): Numeric
- to alarm control center with automatic
- transmission (Point ID, P-100).
Alarm causes
- Wired sensors (sensor 1/2/3)
- Mains failure monitoring
- Direct call (keystroke)
Additional features
.
Supply voltage
- 9-16 VDC (via power adapter to EXT/~ socket)
- Emergency operation: 9 V battery
(Alkaline: typical operating time approx. 70 hours).
Power consumption
- Monitoring: 7 mA (typical) during voice playback: 55 mA (max.)
Housing / Weight
- ABS white/200 x 110 x 31 mm (L x W x H)
- 320 g without battery/power adapter
EXT3 set-RJ45, consisting of
- Sensor connection cable for three floating contacts (sensor 1/2/3)
- Cable length 3 m
PIR set-RJ45 (wired)
- PIR motion detector BBT-PIR-RJ45 (cable 8m) incl. wall/ceiling bracket
- Presence control on motion.
DIN interface EA-ACDC-SWI-RJ45
- Cable length 3 m
- Alarm input (screw terminals): 10-230 VAC/DC (Sensor 1)
- Switch output (screw terminals): potential-free relay contact 230 VAC/2.5 A
z. B. to control a heater, a siren, a floodlight, etc. - Potential-free alarm contact (sensor 2).
Siren connector EA-SIR-RJ45, wired
- with power adapter and integrated siren
- cable length 3 m
Mobile connection
The universal gateway generates a cellular-based analog telephone line
Backup: 12 V battery
Connections: Phone/Power/Ready:Screw terminals
Indications: Field strength with LED
Network: LTE/UMTS/GSM
Protective housing (IP64 / supply voltage 230 V AC / 50 Hz
Order no.: 100.080XBL EA-LTE-IP-DUAL
DIN housing / supply voltage 230 V AC / 50 Hz or 16 - 35 V DC
Order no.: 100.081XBL EA-LTE-DIN-DUAL
IP65 protective housing
Protective housing for EasyAlarm
240 x 191 x 107 mm
incl. DIN rail and bushings
EasyAlarm not included
Order no.: 100.0700