No internet data connection is required, as the EasyAlarm MAN-DOWN uses the telephone line.
Additional details
Once the periodic action is absent during the predefined period
a) motion detector sees no movement
b) radio control button is not pressed
followed by the alarm to the programmed numbers after the adjustable pre-alarm period.
Maximum 10 transmitters per receiver, the free-field range is a maximum of 100 meters.
| EasyAlarm MAN-DOWN Ausführung "kontinuierlich" inkl. - EasyAlarm - Netzadapter - Notruffunksender - externer Funk-Empfänger - Telefonkabel (RJ11) - Telefonadapter (T+T89) |
Zum Shop
|
| EasyAlarm MAN-DOWN Ausführung "periodisch" inkl. - EasyAlarm - Netzadapter - Funk-Notruftaste - PIR-Set-RJ45 (Bewegungsmelder) - Telefonkabel (RJ11) - Telefonadapter (T+T89) |
Zum Shop
|
EasyAlarm® MAN-DOWN is used for the safety of persons working alone, e.g. in companies where it is prohibited to work alone. A fall or similar could have devastating consequences. For you we offer the solution with the automatic alarm forwarding. No internet data connection is required, as the EasyAlarm MAN-DOWN uses the telephone line.
EasyAlarm® MAN-DOWN alarms directly on cell phone, telephone or pager. In the event of an alarm, the alarmed subscriber hears the individual announcement text as well as the cause of the alarm and, if necessary, can also speak to the person seeking help. Up to nine phone numbers can be programmed, which are dialed one after the other until the alarm is acknowledged.
EasyAlarm® MAN-DOWN disconnects a downstream modem/telephone. Anemergency call is triggered even if a downstream telephone is already seizing the line (if a trunk line is shared with another telephone for cost reasons).
EasyAlarm® MAN-DOWN can be connected to a control station. In the event of an alarm, a telephone connection is established with the control station. The EasyAlarm® transmits the cause of the alarm or system messages (e.g. power failure, battery fault) using the Point-ID/ Contact-
ID standard or protocol P-100.
Operating voltage:
- 9-16 VDC (via mains adapter to EXT/~ socket)
- Backup: 9 V battery (alkaline: typ. operating time approx. 50h).
Power consumption:
- Monitoring: 5 mA (EXT) or 10 mA (433)
- (typical) Voice playback: max . 150mA
Case / Weight:
- ABS weiss / 200 x 110 x 31 mm (L x B x H), 320 g ohne Batterie/Netzadapter
Radio sensor:
- Position monitoring: Temporarily switchable off for 5 min (by pressing a button)
- Emergency call buttons: Alarm triggering / alarm cancellation / call acceptance.
- Fault: Radio monitoring or battery insufficient
Position monitoring: Temporarily switchable off for 5 min (by pressing a button)
Emergency call buttons: Alarm triggering / alarm cancellation / call acceptance
Fault: Radio monitoring or battery insufficient
max. 4 radio deadman transmitters per receiver can be taught
wired to EXT connection (occupied se nsor 1/2/3)
The universal gateway generates a cellular-based analog telephone line
Backup: 12 V battery
Connections: Phone/Power/Ready:Screw terminals
Indications: Field strength with LED
Network: LTE/UMTS/GSM
Protective housing (IP64 / supply voltage 230 V AC / 50 Hz.
Order no: 100.080XBL EA-LTE-IP-DUAL
DIN housing / supply voltage 230 V AC / 50 Hz oder 16 – 35 V DC
Order no: 100.081XBL EA-LTE-DIN-DUAL
Waterproof transmitter (wearable; wristband / pendant / belt clip)
Incl. battery (CR2025 3 V)
Incl. wall bracket / ceiling bracket and. Battery (CR 123A)
Presence control on movement. An alarm is triggered if no movement is registered during the programmable time.
Alarm input sensor 1: 10..230 V (AC or DC) with optocoupler
Switching output: 2.5 A/230 VAC (potential-free normally open contact)
Potential-free alarm contact: Sensor 1/2/3
Screw terminals